RT 45000 - 5 years warranty!
The programmable Universal Transmitter RT 45000 is used for measure industrial process signals. It converts Pt, Ni, KTY or TC sensor signals as well as poti, resistor or mV signals on input to standard signals.
Due to the easy configuration via USB interface and the calibrated range selection per DIP switch the Transmitter is suitable for flexible use.
The Simulation Function, switchable on front side, simulates an output reference signal for testing and adjusting of the complete signal path. With der Teach-In Function the measuring range limits can be set during operation.
With the USB Programming-Kit RELMATICset the Transmitter can be configured and all data can be stored by a PC. In mode of programming no additionally auxiliary power is required.
The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. The status of power supply and sensor connection will be displayed by a LED on front.
- Universal Measuring Input
for all common industrial sensor signals
- Easy configurable via USB or DIP switches
complete programmable via USB interface or selectable per DIP switch
- without supply power
- Switchable Service Functions
Simulation and Teach-In Function for an easy commissioning
- 3-port isolation
Protection against erroneous measurements due to parasitic voltages or ground loops
- Extremely slim design
6.2 mm slim housing for a simple and space saving DIN rail mounting
- Optional In-Rail-Bus mounting rail connector
allows for fast and economical installation
- Protective Separation acc. EN 61140
Protects service personnel and downstream devices against impermissibly high voltage